Evo 3-Day Smile
Some patients may not be suitable for our Evo 1-Day Smile, or they may be suitable yet decide they do not need a premium same day treatment. This is why our Evolution Solution also incorporates 3-day, 5-day and 7-day procedures. These innovative treatments remain an attractive alternative to the conventional All-on-4® dental implant treatment, where the patient must wear a temporary converted denture for 5-6 months before their final fixed bridge can be fitted.
Suitable patients who opt for the Evo 3-Day Smile can be enjoying a full new upper and/or lower set of final fixed teeth within 72 hours.
The Evolution Solution
|For those who can be without teeth for 48-72 hours.||Like the Evo 3-Day Smile but for more complex cases requiring higher degrees of fine tuning.|
The final fixed cobalt chrome PMMA reinforced bridge is fitted just three days after the surgical implant preparation.
You are without teeth during this short time.
The final fixed cobalt chrome PMMA reinforced bridge is fitted five or seven days after the surgical implant preparation.
You are without teeth during this short time.
|Your practitioner will advise which treatment is suitable for your clinical case.|
What to expect
Before any patient undergoes treatment at Evodental, they need to fully understand the procedure and what happens at each stage of their journey with us.
When you arrive for your treatment appointment, you will already have attended the centre for both your free initial consultation and your record taking appointment. Detailed clinical and technical planning beforehand is a must with our ‘3D Scan and Plan Pathway’, hence these appointments are a mandatory part of your journey with us. They enable us to gather all the information we need to plan and carry out your procedure in advance using our 3D software.
On your treatment day, you will undergo the surgical procedure under local anaesthetic (lasting approximately 1 hour) and then return home. Meanwhile, our on-site Evolab3D expert craftsmen will begin work on creating your Evolution Solution.
Three, five or seven days after the surgical implant preparation (depending on the procedure), you will return to the centre to have your bespoke and refined cobalt chrome PMMA bridge fitted.
It is our job to make your whole experience with us as comfortable as possible. We are committed to outstanding levels of service and clinical care, and have pain management procedures in place to ensure a worry-free experience with us. You will not feel the surgery taking place as it is carried out under local anaesthetic. You’ll also have a dedicated Client Coordinator to guide you through the procedure from start to finish, and our experienced team of practitioners, nurses and technicians will work together to provide you with a dental solution for life.
Your step-by-step journey
Your journey with us begins here.
You’ll meet your dedicated Client Coordinator who will be with you through the entire process. You’ll then be introduced to your dental implant clinician who will carry out the clinical assessment. The clinical assessment is mandatory for all patients as it enables us to assess your medical and dental suitability for implants and for you to find out more about us and the treatment. You’ll be able to ask any questions you have.
As part of the clinical assessment, we may take a 2D (OPG) or a 3D (CBCT) scan of your mouth. This service is included as part of our free, no-obligation consultation process.
Based on our analysis, we will put together a comprehensive treatment plan and discuss this thoroughly with you. You will also be given a copy to take home and look over in detail.
You will also receive a quotation of the actual cost of your proposed treatment, and be able to discuss finance options.
If you decide to proceed with treatment, we will schedule a record taking appointment for you. This appointment takes approximately 1 hour. You practitioner will take initial dental impressions of your teeth and a bite record. You, together with your clinical and technical team, will decide on the size, shape and colour of your new teeth.
We will then arrange your treatment appointment.
A typical day for an Evo 3-Day Smile, Evo 5-Day Smile or Evo 7-Day Smile would be as follows:
You arrive at the centre and, after settling in, are given your necessary pre-operative medication by a member of the clinical team.
You are taken into surgery and your clinical team carries out all surgical work, including all necessary teeth extractions and placement of the implants. The procedure involves placing anatomy specific geometry implants in the jawbone using keyhole surgery principles. The implants are placed at specific pre-determined angles and fixed in place. Detailed impressions are then taken and sent to our on-site laboratory. The surgery takes approximately 1 hour for each jaw and is carried out under local anaesthetic. After the surgery, you return to your private waiting suite to rest and can then return home. This is the last time in your life that you will be without teeth! You will be given full post-operative instructions and medication.
You return to the centre in 3, 5 or 7 days (depending on the procedure) and your final reinforced cobalt chrome PMMA bridge is fitted. This is not a temporary converted denture. The bite is checked and, once everything is satisfactory, you are free to return home with your permanent new teeth in place and enjoy a rest and meal.
There will be a recovery period following your dental implant procedure. Approximately 20-24 weeks later, we will see you again for a check-up to make sure that everything is healing properly. The prosthesis is removed and relined to ensure a perfect fit. Any post op check-ups are at no additional cost.
Your aftercare is very important to us and we recommend that you visit us annually for us to check how your implants are doing and that your new teeth are also performing well.
We take this opportunity to carry out a thorough oral screening; checking the health of the implant, the surrounding bone and gums, and the state of your dental prosthesis (to detect any signs of wear and tear). The service includes the removal of your bridge which undergoes microscopic analysis in our on-site lab, a full ultrasonic clean and polish of your teeth to return them to their original finish, and brand new connecting screws fitted where necessary. This will ensure a continued excellent fit and a “good as new” feel. There is a fee for the annual screening and maintenance service.